Let’s take a look at how this car emergency jump starter portable air pump launched by Rich Century.
The design of the AP06 emergency car jump starter portable air pump from Rich Century is smaller than I imagined. The size of the whole machine is 19.5 * 10.6 * 4.6 cm (including the trachea), which looks like a large power bank and is very convenient to carry of.
There are five buttons on the front of the car jump starer portable air pump. The “+” and “-” buttons in the up and down directions are used to set the tire pressure. The left side is the lighting of the LED flashlight, emergency warning light and signal light.
The switch button, short press is the normal light switch, the right button is the inflation mode switch button and the tire pressure standard switch button, in addition to the center switch button and the switch button to start and stop inflation. In the middle is an LED digital display screen, which is used to display the current air pressure value.
There is a Type-C charging interface (9V 2A) at the bottom, as well as a USB2.0 power output interface. In addition, an interface for an emergency car jump starting battery clip is hidden to support 12-16V 250-1000A car emergency jump starter output.
In addition to the standard American gas nozzle (tracheal length 22cm) on the AP06 vehicle emergency car jump starter portable air pump also equipped with three kinds of gas nozzles and gas needles, namely the French nozzle, the swimming ring gas nozzle and the gas needle. Ball air needle, that is to say, in addition to inflating cars and motorcycles, it can also inflate balls, swimming rings and other equipment, which is very convenient; plus a car emergency start battery clip.
How to use ?
1. The emergency ignition of the car starts
After inserting the battery clip for emergency car jump stater into the OD port at the bottom of AP06, clamp the + and – poles of the battery clip to the positive and negative poles of the car battery, then start the car, and remove the battery clip after the car starts.
2. Car tire pump
Press and hold the start/stop button in the middle of the AP06 machine to turn it on, and switch the mode to 2.5BAR in car mode.
Connect the air valve to the tire valve, when the sound of tire deflation is no longer heard, it means that it has been connected.
AP06 car air pump supports the function of stopping when the tire pressure is full. For example, when refilling the car, the tire pressure of the air pump is 2.5BAR. Press the start button to start inflation, and when the tire pressure of the car reaches 2.5BAR when the inflation is stopped.
Others such as 2.4BAR for motorcycles, 35PSI for bicycles, and 8PSI for balls operate the same way.
A multi-functional emergency car jump starter portable air pump that can start the car with electric ignition and pump air for the tires of the car must be a must-have emergency tool for car owners
RichAge is a technology enterprise focusing on product design, research and development, manufacturing, sales and service. It has passed the ISO9001 international quality assurance system, scientific and rigorous quality control system, and its products have obtained 3C/CE/FCC/ROHS certification. Covering more than 70 countries and regions in Europe, the Middle East, and Southeast Asia.